Sod Calculator
A standard pallet of sod covers about 450 square feet, and a single roll covers about 10 square feet.
Sod is sold by the square foot, the roll and the pallet. Measure each lawn area separately, add a little for trimming waste, and order by the pallet once you pass about 400 square feet.
Sod calculator
Area 1
You need
0rolls
- Area covered
- 0 sq ft
- Including waste
- 0 sq ft
- Estimated cost
- $0
Roll and pallet coverage follow the most common US grower sizes; regional sizes vary. Estimates only — confirm with your supplier before ordering.
Sod coverage by option
| Option | Covers | Per 500 sq ft |
|---|---|---|
| Roll (16" × 48") | 10 sq ft | 50 rolls |
| Pallet (450 sq ft) | 450 sq ft | 2 pallets |
Sod questions people actually ask
- How many square feet is a pallet of sod?
- Most pallets cover 450 square feet, though regional growers sell 400 and 500 square foot pallets. Confirm with your supplier before ordering.
- How much extra sod should I order?
- Add 5 to 10 percent for trimming around curves, beds and walkways. Odd-shaped yards run toward the higher end.
- How much does a pallet of sod weigh?
- Between 1,500 and 3,000 pounds depending on soil moisture. A half-ton pickup should carry no more than one pallet.
Gear for a sod job
Paid links — we may earn a commission at no extra cost to you.
Related calculators
- Topsoil CalculatorOne cubic yard of screened topsoil covers about 108 square feet at 3 inches deep and weighs roughly 1.1 tons.
- Grass Seed CalculatorA new lawn needs about 1 pound of grass seed per 250 square feet; overseeding an existing lawn takes about half that.
- Compost CalculatorOne cubic yard of compost topdresses about 650 square feet of lawn at a quarter inch, or fills 108 square feet of bed at 3 inches deep.
- Mulch CalculatorA cubic yard of mulch covers about 108 square feet at 3 inches deep, so most beds need roughly 1 cubic yard (13.5 two-cubic-foot bags) per 100 square feet.
How this number is calculated
Roll and pallet coverage follow the most common US grower sizes; regional sizes vary. Counts are the total area divided by the coverage of one unit, rounded up, with your waste allowance applied. See all our assumptions.